Exterior
Concrete
Sealer

V‑SEAL is devoted to protecting exterior surfaces from deterioration, erosion, vehicle traffic, chemical exposure, moisture, and harsh weather.

Exterior surfaces require concrete sealers that increase strength, repel moisture, and protect from chemical exposure and weather conditions over time.

SHOP THIS PROJECT

FOR MORE EXPERT ADVICE CALL

877-738-7325

V-SEAL Expert Recommendations:

There are a variety of products we can recommend, depending on your specific exterior commercial project. For sealing and curing commercial structures such as parking decks, roads, driveways or sidewalks, V‑SEAL 101 and V‑SEAL 102 are excellent choices. When applying, surfaces should be saturated and excess sealer should be removed or pushed into the next area. Acceptable tools include pump-up garden sprayers, paint rollers, shop brooms or squeegees. When Industra Seal 117 PLS is used as a secondary application to V‑SEAL 101 and 102, it further increases substrate strength, moisture repellence, and stain resistance.

Suggested Product Types:

Penetrating Sealers:
Crystallize minerals in the substrate just below the surface. V-SEAL offers sealers that are hydrophobic and oleophobic.

Topical Sealers:
Form a membrane layer over the substrate surface adding protection from moisture stains, chemicals, grease, gas, oils, and adding decorative elements such as high shine or color.

  • pro tip 1

    Topical Sealers form a membrane layer over the substrate surface, adding decorative elements such as high shine or color, and protection from moisture stains, chemicals, grease, gas, and oils.

  • pro tip 2

    Before applying penetrating sealers, surfaces must be dry and free of loose debris.

  • pro tip 3

    INDUSTRA-GLOSS WB does not require mixing, but it should be stirred thoroughly prior to application.

  • pro tip 4

    Surfaces treated with V-SEAL Sealers are more abrasion resistant and more resistant to chemicals and water than untreated concrete.

  • pro tip 5

    V-SEAL 101 and 102 do not require mixing and should be applied uniformly with a broom, roller, or low-pressure sprayer.

  • pro tip 6

    Immediately disperse any puddles that form as a result of excessive application.

  • pro tip 7

    If rolling application, roll in a “V” or “W” pattern, working quickly to apply the product thin and evenly.

  • pro tip 8

    Once opened, CounterTek products should be used within one month or no more than three applications

  • pro tip 9

    Penetrating sealers soak down into the substrate, then react chemically to form a permanent bond with the substrate.

  • pro tip 10

    Solvent based acrylics, such as INDUSTRA-GLOSS 350, will provide high color enhancement and high gloss.

  • pro tip 11

    When using Blue Bear outdoors, protect plants and vegetation with a plastic drop cloth.

  • pro tip 12

    Spread ReKRETE evenly over the concrete going long ways, then width ways, in a crossover pattern, to ensure a smooth layering on the surface.

  • pro tip 13

    V-Scrub is recommended for use on cement substrates and surfaces, not wood, plastic or metal.

  • pro tip 14

    Penetrating sealers can be applied to any porous concrete, brick or stone substrates.

Suggested Products

Penetrating
Sealers

Topical
Sealers

Our expert technical advisors are available to answer any questions about your upcoming project.

V-SEAL offers the world’s largest sealer selection – including many products beyond the scope of this website. To review your commercial project with a Technical Advisor, order commercial products, or receive detailed specifications and price quotations, please contact:

877-738-7325